Power Lock: To lock the Power Button press and hold both the [1] button and the down arrow button for 10 seconds. OSD Lock: To lock the OSD Menu press and hold both the [1] button and the up arrow button for 10 seconds. Note: These same buttons, when pressed for another 10 seconds, will unlock the feature.
How do I unlock the power button on my monitor?
To remove the OSD Lockout message, release the Power button (if something was pressing against it), and press and hold the button again for about 10 seconds, until the message goes away. If the OSD Lockout message does not go away, the button may be stuck or the hardware behind the button might have become defective.
Why is Viewsonic monitor not turning on?
Troubleshooting Common Problems. Make sure you have turned on the monitor by pressing the Power button. Make sure the power cord is properly and securely connected to the monitor and power outlet. Plug another electrical device into the power outlet to verify that the outlet is supplying power.
How do I remove OSD lock from monitor?
Please check your monitor User Guide to find the exact procedure if this procedure does not work. To remove the OSD Lockout message, release the Menu button (if something was pressing against it), and press and hold the Menu button again for about 10 seconds – until the message goes away.
How do you unlock your monitor?
Press and hold the main menu button on the monitor for 10-15 seconds. The lock symbol should change to an open padlock.
What causes monitor not turning on?
If the light on the monitor remains off, the monitor is not receiving power from either the wall outlet or the power adapter. If you have a flat panel LCD monitor, unplug the monitor power cable, wait about 30 seconds, reconnect the cable and then turn on the monitor. This resets the electronics on the monitor.
How do I wake up my Viewsonic monitor?
Press the “Input” button on your LCD monitor’s front panel repeatedly at three- or four-second intervals until your monitor wakes up.
Do monitors have a reset button?
On the front of the monitor, press the MENU button. In the MENU window, press the UP ARROW or DOWN ARROW buttons to select the RESET icon. Press the OK button. In the RESET window, press the UP ARROW or DOWN ARROW buttons to select either OK or ALL RESET.
How do I power reset my monitor?
Remove the power by either disconnecting the supply at the Monitor or from the wall. You should wait a period of at least 10 seconds before reconnecting power. When the Monitor is properly power cycled and rebooted, both the green and blue LEDs on the Monitor should light up.
How do you unlock a locked OSD?
To unlock the OSD lock, Press and hold the menu button for 10 seconds then the menu will appear.To lock OSD press and hold the menu button for 10 seconds. Highly active question.
What does OSD lock stand for?
OSD is an abbreviation for “On Screen Display.” It is a configuration menu that comes with a variety of monitors. The onscreen display may appear by pressing the MENU button or one of the other buttons on the front or side.
What does OSD on a monitor mean?
An on-screen display (OSD) is a control panel superimposed on a computer monitor, mobile device, television screen or another electronic device display that enables users to select viewing options and/or adjust components of the display, such as brightness, contrast, and horizontal and vertical positioning.
Why can’t I turn on my monitor?
Check the power cable If the power cord is removable from the back of the monitor, try replacing it with another power cable. If you still cannot turn on the monitor after trying another wall outlet and cable, the monitor is broken and should be replaced.
Why won’t my monitors turn on when I turn my PC on?
Make sure the power cord for the monitor is plugged in and the video cable is connected to the correct port on the back of the computer. Verify the computer is actually powered up and running by checking the power lights on the case or listening for the fans and hard drive spinning.
What is power key lock?
If a security lock is enabled, checkmark the Power key instantly locks checkbox to override the Security lock timer setting and lock the screen as soon as you press the Power/Lock Key (on the back of the phone).
Why is my monitor not turning on when I turn on my PC?
Try connecting the monitor with a different video cable. If the monitor still does not work, replace the monitor power cable. Replace or service the monitor if it still does not turn on.
How do I restart if my power button doesnt work?
The first thing you should do if the power button of your Android mobile is not working is to plug in the charger and hold the volume down button until the device turns on. Most of the devices boot up with this method.
What to do if shutdown button is not working?
Go to Hardware and Sound → Power Options. Click on Choose what the power button doeschoose what the power button does. Go to Shutdown Settings. Uncheck the Turn on Fast Startup (recommended) optionturn off fast startup windows 10.
What causes a dead monitor?
If your monitor stops working, first check to make sure the monitor and power cables are connected properly. Connect another monitor to the computer to see if the problem is isolated to the first monitor. If the second monitor doesn’t work, you may have a bad graphics card.
Why won’t my monitor wake up?
To wake up a computer or the monitor from sleep or hibernate, move the mouse or press any key on the keyboard. If this does not work, press the power button to wake up the computer. NOTE: Monitors will wake up from sleep mode as soon as they detect a video signal from the computer.
Why did my monitor go black and wont turn on?
We’ll look at some things that can cause a black or blank screen: Connection problems with your monitor or screen. Display adapter driver update issues. Issues with recent system updates or installations.
Which key is the sleep button?
The Alt + F4 Sleep Mode Shortcut Then, press Alt + F4 and you’ll open the Shut Down Windows dialog box. Depending on your system, you’ll likely see Shut down or Sleep in the dropdown box by default. If you’re happy with this, just hit Enter to confirm the selection.
